Sound familiar?Erin
- The call
- The keys fell out of a gym bag somewhere between the arena and the parking lot. The ring has a tag from the building with the unit number on it. Whoever finds it has an address and a key that fits.
The spare under the planter by the side door is gone. Everyone in the family swears they did not take it, the planter has clearly been shifted, and you have no idea how long ago that happened.
In plain words
Rekeying and replacing a lock arrive at the same place by different roads. Replacement puts new hardware on the door: a new deadbolt or handle, and a finish that may not match its neighbours. Rekeying leaves all of that alone and changes what is inside the cylinder, commonly the pin stack on a conventional lock or a reset on a homeowner-rekeyable one, so a different key runs it. For hardware in good condition, that is the sensible choice: the door looks and feels as it did while the old key is retired. A worn cylinder can be replaced and keyed to match the rest in the same visit.
Lost Keys — Same-Visit Rekey · Erin
How the visit goes
Scene 1
Rekey or replace, cylinder by cylinder
Rekeying suits hardware in sound condition, and most cylinders on a house qualify. The locksmith flags the exceptions while the list is being made: a plug worn oval by decades of use, a cylinder packed with salt and grit from a side door that faces the driveway, a knob lock so light it offers little resistance, or a keyway that no longer has blanks available. For those, a replacement cylinder or a complete new deadbolt keyed to match the rest is proposed as its own item, so you decide door by door. The aim is that every cylinder leaving the visit on a new key is one that will keep turning well for years.
Scene 2
Resetting a homeowner-rekeyable cylinder without its key
Some newer residential locks carry a small slot beside the keyway that lets a homeowner change the key with a learn tool, but only while a working key is in hand. When that key is the one that was lost, the locksmith uses the manufacturer's reset tool instead: the cylinder is pulled from the lock, seated in the reset fixture, and its internal sidebar and wafers are returned to a blank state. A new key of the right blank is then inserted, the learn tool sets the cylinder to it, and the lock goes back on the door taking the new key and rejecting the old one.
Scene 3
Cylinders that turn more sweetly than before
A cylinder that has been apart, cleaned and repinned usually feels better than it did before the key went missing. Old grease, road salt and the grit that collects in a keyway over a decade came out with the plug, and a dry lubricant went in. Keys cut to code seat fully and lift each pin cleanly. If a door had a key that needed a wiggle or a shove, that is often gone. Follow your lock's own maintenance guidance to keep it that way: many cylinders take a puff of graphite or PTFE into the keyway now and then, some a specified liquid lubricant instead; general household oils and sprays collect dust and gum the pins.
In the van
- Dry graphite or PTFE lubricant
- Code key machine
- Rekeying pin kit
- Rekeyable-cylinder reset tool
- Replacement cylinders
What shapes the quoteTamarac Estates Locksmith Specialists
- Restricted or high-security keyways
- Patented and high-security cylinders carry more parts, need dedicated pin kits and issue keys through authorised channels. Rekeying them takes longer and the blanks cost more than common residential ones.
- Condition of the cylinders
- A clean, healthy cylinder is repinned as is. One clogged with salt and grit is cleaned first, and a worn or damaged one is replaced rather than repinned, each priced as its own item.
- Time and day of the call
- A weekday afternoon and a late evening or holiday call cost the same amount for a lost-key rekey. When a stolen wallet makes the visit urgent, the locksmith still confirms the exact figure on site, once the cylinders and keys needed have been looked at.
FeesSame any hour
Short answers to common questions
A garage door remote was on the ring. What happens with that?
The opener on the garage ceiling holds a memory of every remote paired to it, and it can be erased in one step so the lost remote is forgotten. The remotes still in the household are paired again afterwards, and a keypad on the outside of the garage gets a new code if you have one. The locksmith can do this during the visit, and it takes only a few minutes at the opener.
Does the locksmith need to see the actual lost key, or just look at the lock?
Just the lock, and the door it is fitted to. A rekey works on the cylinder itself: the locksmith opens it, fits a new set of pins matched to a fresh key, and the old key stops working the moment that is done, whether or not it ever turns up again. Knowing roughly how the old key looked, cut on both edges, a chip on the head, a certain brand, can still help identify which cylinders in the house shared that key.
Can I just have another key cut instead?
You can, and it solves being without a key. It leaves the lost one working, though, which is the half of the problem that keeps people awake. Rekeying takes about as much effort as a trip to a hardware store counter and ends with a new key in your hand and the old one retired. If the key was mislaid somewhere it will never be found and named nothing, a plain copy is a fair choice.
Lockout Services
- Business Lockout ServiceThe manager who holds the only set of office keys is on a plane.
- Broken Key ExtractionThe key went in like any other morning, you turned it, and something gave with a small metallic click.
- Break-In Damage Lock RepairThe shop's aluminum door has a bent meeting stile and the hookbolt is jammed half out.
- Seized & Jammed Lock OpeningThe lock works, but only if you lean on the door with your hip while turning the key.
Erininformation
WellingtonOntario
Lost Keys — Same-Visit Rekey · Caledon, Tamarac Estates, Alton, Belfountain, Caledon Village, Cataract, Inglewood
- Town
- Erin, Wellington
- In business
- 32 years
- Hours
- Open 24/7
- Nights, weekends and holidays, same fees
- Phone
- (289) 206-1975
- Visits
- On-site assessment preferred. Request a visit or call.
2021 census: what it means at the door
Every square is one home in a hundred.
- 58 in 100 homes · older homes
- 91 in 100 homes · mostly houses
- About 58% of homes in Erin were built in 1980 or earlier, according to the 2021 Census.Layers of paint build up on older doors and frames, and a lock that seemed to fail is sometimes a latch glued shut by the last coat. Part of the visit in an older area is freeing hardware, cleaning the edges and checking the door swings true.
- Single-detached houses make up about 91% of homes in Erin (2021 Census).Where homes are mostly detached, patio and sliding doors deserve attention alongside the hinged ones. Auxiliary locks, pin locks and better latches for sliders are routine additions that a locksmith brings on the same visit as the front door work.
On-site assessment
Request a visit.
The spare under the planter by the side door is gone.
(289) 206-1975, open 24/7.