Skip to content
TamaracEstates Locksmith SpecialistsOpen 24/7 (289) 206-1975
Two brass house keys on a ring resting on a workshop counter. — Spare Car Key Duplication, Inglewood

Car keys · Inglewood

Spare Car Key Duplication

A lockout last month ended with a locksmith opening the door and going home, and the same single key has been carried ever since with nothing behind it. The relief of getting back in faded within a week into the same exposure.

In plain words

Spare car key duplication puts a second working key into your hand while the first is still around to copy from. The locksmith checks that you are entitled to the vehicle, reads the blade the existing key was cut to, and gives the new blank the same electronic identity the original carries, whether that means cloning a compatible transponder chip or enrolling a fresh chip through the car's diagnostic port. Before the visit ends, the new key is proven in every door, the trunk and the ignition or start button, so you leave with two keys known to work, not one tested key and one hopeful copy.

Sound familiar?Inglewood

The call
A teenager just passed a driving test and reasonably wants a key of their own rather than negotiating over the family's single copy every time the car is needed. Two drivers and one key keep colliding on the same schedule.

NextHow the visit goes

Spare Car Key Duplication · Inglewood

How the visit goes

Technician holding a key fob at a folding table with a tablet, loose fobs and a hard case beside a dark SUV. — Inglewood
  1. Scene 1

    Assessing the fob's electronics

    Where the key includes a remote or a proximity fob, the locksmith checks the battery, tests every button against the vehicle, and confirms whether functions like remote start, a panic alarm or a power hatch release are part of what the spare needs to reproduce. A fob that has been dropped or exposed to water sometimes still passes buttons but fails intermittently, which is worth knowing before it becomes the pattern a new key is measured against. Confirming the battery type while the shell is open also saves a second trip later when it eventually runs down on its own.

  2. Scene 2

    Cutting the blade

    A mechanical duplicate is produced either by tracing the original on a key-cutting machine, which follows every notch of the existing blade into a fresh blank, or by cutting to a factory code pulled from the VIN and the lock manufacturer's records. Code-cutting is used when the original is too worn to trace reliably, since copying a worn blade would simply pass its rounded edges on to the spare. Either way the new blade is deburred and test-fitted into the door or ignition lock before any electronic work begins, so a mechanical problem is caught early rather than blamed on the chip later.

  3. Scene 3

    A record worth keeping

    A short note of how many keys exist for the vehicle, what each one can do, and who holds it is a small thing to write down and a genuinely useful one to have later, whether that later is a private sale, an insurance question, or simply working out which key someone borrowed and forgot to return. This record also makes any future visit faster to start, since a returning locksmith or a different one entirely can begin from a known baseline instead of counting keys from scratch.

In the van

  • Coin-cell fob battery
  • Key blank matched to blade profile
  • Transponder chip
  • VIN and key-system reference
  • Diagnostic port programming interface

What shapes the quoteTamarac Estates Locksmith Specialists

Condition of the working key
A clean, unworn original traces onto a blank without much fuss, while a thinned or damaged blade may need cutting to a factory code instead, which is a different process with its own materials.
Manufacturer-specific security systems
Certain manufacturers build key systems that call for specialized equipment or additional authorization steps, which can mean more time at the vehicle than a more widely supported system.
Aftermarket alarms or remote starters
A factory system wired into a third-party alarm or remote starter can add extra steps to programming, since the added equipment sometimes changes how the vehicle's module responds during enrolment.

FeesSame any hour

Have it ready

Before you call · 0 / 3

(289) 206-1975

Short answers to common questions

How should I store the spare once I have it?

Somewhere other than inside the vehicle, since a spare kept in the glovebox solves little if it is the vehicle itself that becomes inaccessible. A bag that travels separately, a drawer at home, or a trusted family member all work. A passive proximity spare also benefits from a signal-blocking pouch during storage, since that kind of fob keeps broadcasting even sitting untouched in a drawer; a standard button-operated remote does not need the same pouch.

Why does the VIN matter for making a spare key?

The VIN identifies the exact immobilizer generation and lock system your particular vehicle left the factory with, which decides whether the chip can be copied directly or needs to be freshly coded through the diagnostic port, and which blank and blade profile are correct. Two cars that look identical from the outside can use different systems a model year apart, so the VIN removes the guesswork.

What if the fob's battery is already low?

A low battery in the original does not stop a spare from being made, since the chip and code stored inside still respond during programming even as the battery fades. It is worth mentioning the low battery when you call, though, since the new fob is a natural moment to have a fresh battery on hand for both keys and to note which type each one takes.

Inglewoodinformation

PeelOntario

Town
Inglewood, Peel
In business
32 years
Hours
Open 24/7
Nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

2021 census: what it means at the door

Every square is one home in a hundred.

  • 30 in 100 homes · newer homes
  • About 30% of homes in Caledon were built in 1980 or earlier, according to the 2021 Census.New construction settles in its first years, and a door that closed perfectly at move-in can begin to catch as the frame finds its final position. A locksmith visiting a newer home adjusts strikes and hinges so the bolt throws freely again.
  • Single-detached houses make up about 81% of homes in Caledon (2021 Census).A detached house gives a locksmith room to work: full access to both sides of every door, hinges and frames included. Repairs and upgrades can be thorough, from the front deadbolt to the gate latch, with nothing off limits.

Source: Statistics Canada, Census Profile

Open Inglewood in Google Maps

On-site assessment

Request a visit.

A lockout last month ended with a locksmith opening the door and going home, and the same single key has been carried ever since with nothing behind it.

(289) 206-1975, open 24/7.